4 از 5.0 با 16 رای
مستندات:
کتابخانه نمایشگر 1.44 اینچی
چیپ درایور ILI9163
Description:
The
ILI9163C full color TFT display module is an SPI protocol based display
with a resolution of 128*128 pixels and 1.44 inch size. It displays up
to 262,000 different colors. The module may be considered as a sibling
to the 1.8″ TFT display, by this fact that it is much faster and is more
cost efficient than the 1.8″ TFT display.
The TFT display
communicates with the microcontroller over SPI protocol, so you need to
connect it to the SPI pins of the Arduino. Before connecting it directly
to the 5v logic level of the Arduino, ensure that it has a voltage
regulator. Because the display may be destroyed if the version of the
display you have does not have the regulator. If the display does not
have a voltage regulator, you can use any logic level converter between
the display and the Arduino.
It can be used in any embedded systems,
an industrial device, security and hand-held equipment which requires
display in high quality and colorful image.
ILI9163 Chihp driver is a
262,144-color one-chip SoC driver for a-TFT liquid crystal display with
resolution of 132RGBx162 dots, comprising a 396-channel source driver, a
162-channel gate driver, 48,114bytes GRAM for graphic data of
132RGBx162 dots, and power supply circuit.
Features:
Display Size: 1.44″
Viewable area: 1.1″
Driver IC: ILI9163
Input Voltage: 3.3 ~ 5 V
Pixel Resolution: 128 x 128
PCB Size (mm): 45 × 32 (LxW)
Compatible with : 5110 interface