موجودی انبار : 10 عدد
4 از 5.0 با 6 رای
ماژول کنترل دور موتور DC دارای خروجی PWM با ولتاژ DC 6-90 V
کاربرد ماژول کنترل دور موتور DC دارای خروجی PWM:
- کنترل کننده سرعت موتور دی سی
- کنترل دور اسپیندل
مشخصات ماژول کنترلر و تنظیم کننده سرعت موتور:
- ولتاژ ورودی: 6 ~ 90 ولت DC
- جریان خروجی: 0 تا 15 آمپر
- جریان مداوم: 10 آمپر
- نوع تنظیم سرعت: Current regulation
- ابزار تنظیم سرعت: پتانسیومتر خطی 10K
- محدوده سرعت مدولاسیون پهنای پالس: 0 تا 100 درصد
- فرکانس کنترل: 16 کیلوهرتز
- نوع سیم بندی: Fence Terminal Block
- محافظت: محافظت در برابر ولتاژ بیش از اندازه و پلاریته توان معکوس
- مجهز به فیوز سرامیکی 20 آمپر
مستندات:
عملرد کنترلر موتور جریان بالا با پتانسیومتر
Description:
This PWM DC motor speed
controller and regulator module with the voltage range of 6V to 90V and
the current rating of 15A is a large-current motor controller with a
high-quality potentiometer. It has High-quality materials which is
durable and Eco-friendly.
For assembling a robot, you must learn
about controlling a variety of motors like DC motors, Stepper motors,
and servos. If you want to have complete control over DC motor, you must
control its speed and rotation direction. This can be acquired by
applying these two solutions, together: PWM (For controlling speed) and
H-Bridge (For controlling rotation direction). The DC motor speed can be
controlled by varying its input voltage. An easy way to vary its input
voltage is PWM (Pulse Width Modulation). PWM is a technique where the
average value of the input voltage is adjusted by applying a series of
ON-OFF pulses. The average voltage is proportional to the width of the
pulses named as the Duty Cycle.
Speed regulators have been widely
used in industrial DC motor speed regulation, industrial belt speed
regulation, lighting regulation, computer power cooling, DC fan, etc.
Note:
1.
DC motor speed regulator input is DC, can not be directly connected to
AC (for example household 220V AC), otherwise, it will burn.
2. do
not reverse connect the positive and negative terminals of the DC power
supply, otherwise, the speed regulator may be damaged.
3. the motor
can not be divided into positive and negative when the direction of
operation is not consistent with expectations, you can adjust the line
sequence to change the direction easily.
Features:
Input Voltage: DC 6V-90V
Output Voltage: Linear under load
Power: 0.01-1000W
Output Current: 0-15A
Protection: Power reverse protection - Voltage overvoltage protection
Continuous Current: 10A
Speed Regulation Type: Current regulation
Speed Regulation Mode: Potentiometer (linear)
PWM pulse speed range: 0% -100%
Control Frequency: 16KHZ
20A fast melting ceramic fuse
Wiring Type: Fence Terminal Block
Knob Line Length: 20CM
Module Size: 71MM * 61MM * 31MM
Motherboard Mounting Size: 53MM * 63MM