موجودی انبار : 22 عدد
4 از 5.0 با 16 رای
تستر قطعات الکترونیکی LCR-T7
کاربرد تستر الکترونیکی LCR-TC7 :
- تعمیرات قطعات الکترویک
مشخصات تستر الکترونیکی LCR-TC7 :
- صفحه نمایش TFT 160*128
- دکمه چند کاره
- قابلیت تست ترانزیستور و دیود زنر 0.01-30V
- مجهز به دریافت کننده IR
- رابط شارژ میکرو USB
- کالیبره اتوماتیک با قابلیت Self-test
- پشتیبانی از Hitachi IR coding
- قابلیت خاموش شدن خودکار
- قابلیت تشخیص ولتاژ باتری Li-ion
مستندات:
آنباکسینگ LCR-T7
Description:
This is an LCR-TC7
Multi-functional Electronic Component Tester that can be widely used to
detect NPN and PNP transistor, capacitor, resistor, diode, triode,
N-channel, and P-channel MOSFET, IGBT, JFET, Triac, and battery, etc. It
can also be used to detect infrared waveforms, Zener diode and includes
the function of self-calibration.
After detection, align the
infrared remote control with the “IR” light, then press the button on
the remote control, if the detector successfully decodes it, it will
display the data code and infrared waveform.
One button operation
automatically detects and shutdown, and you can press the
multi-functional button to close the detector too.
Put the pins of
the component in the corresponding area, then dial the little handle and
the detector will test it automatically, finally, the results will
display on the backlight TFT screen clearly.
Attention:
All
ways are sure to discharge capacitors before connecting them to the
Tester! The Tester may be damaged before you have switched it on. There
is only a little protection at the MCU’s ports. Extra caution is
required if you try to test components mounted in a circuit. In either
case, the equipment should be disconnected from the power source and you
should be sure, that no residual voltage remains in the equipment.
Specification:
160x128 TFT display
Multi-function key
Transistor test area
Zener Diode test area
IR receiver window
Micro USB Charging Interface
Charge indicator LED
Features:
Automatic detection of Zener diode 0.01-30V
Self-test with automatic calibration
Support Hitachi IR coding
IR waveform display
Infrared receiving instruction
Measurement results using TFT graphic display(160x128)
One key operation
Auto Power Off(Timeout Settable)
Li-ion Battery voltage detection
Support Chinese and English