ماژول رگولاتور DC به DC افزاینده 2 آمپر MT3608 با قابلیت تنظیم ولتاژ خروجی

Description:
A DC-to-DC converter is an electronic circuit that converts a source of direct current (DC) from one voltage level to another. It is a type of electric power converter. Power levels range from very low (small batteries) to very high (high-voltage power transmission).
To reduce voltage ripple, filters made of capacitors (sometimes in combination with inductors) are normally added to such a converter's output (load-side filter) and input (supply-side filter).
The MT3608 is a constant frequency, 6-pin S0T23 current mode step-up converter intended for small, low power applications. The MT3608 switches at 1.2MHz and allows the use of tiny, low-cost capacitors and inductors 2mm or less in height. Internal soft-start results in small inrush current and extends battery life. The MT3608 features automatic shifting to pulse frequency modulation mode at light loads. The MT3608 includes under-voltage lockout, current limiting, and thermal overload protection to prevent damage in the event of an output overload. The MT3608 is available in a small 6-pin SOT-23 package.  

Application:
Battery-Powered Equipment
Set-Top Boxed
LCD Bias Supply
DSL and Cable Modems and Routers
Networking cards powered from PCI or PCI Express Slots

Features:
Maximum Output Current: 2A
Input Voltage: 2V ~ 24V
Maximum Output Voltage: 5V ~ 28V
Efficiency: > 93%
Mechanical Size: 36mm x 17mm x 14mm

Instructions:
1. Make a connection for + and – terminals as an input voltage (2 ~ 24V).
2. Try to adjust the potentiometer to reach the desired output voltage.

Note:
Input voltage should not exceed the maximum input voltage. The peak current output current does not exceed 2A.