اسکنر اثر انگشت نوری AS608 دارای رزولوشن 500dpi و ارتباط TTL / USB 
سنسورهای اثر انگشت از نوع سنسورهای بیومتریک هستند که با استفاده از داده 
های بیولوژیکی منحصر بفرد هر انسان برای اندازه گیری استفاده می کنند که 
یکی از این داده های منحصر بفرد اثر انگشت هرفرد است که فقط مخصوص شخص می 
باشد و با دیگری تفاوت دارد. ماژول های اثر انگشت AS608 دارای سرعت بالا 
برای 
تشخیص اثر انگشت است. این سنسورها طبق تست های انجام شده عملکرد سریعی
 را از خود نشان می دهند. یکی دیگر از مزیت های خوب این سری از ماژول ها که
 می توان به آنها اشاره کرد، قابلیت تنظیم سطح امنیت می باشد. ماژول ماژول 
اثر انگشت AS608 یک ماژول پردازش اثر انگشت یکپارچه است که مسیر نوری و 
قسمت پردازش اثر انگشت را ادغام می کند. این ماژول به خوبی با شرایط مختلف 
انگشت وفق می یابد یعنی اگر انگشت خشک یا مرطوب باشد سنسور به خوبی آنرا 
تشخیص می دهد. ماژول اثر انگشت AS608 ماژولی دارای دقت و سرعت بالای 
عملکرد، الگوریتم تطبیق با کارایی منحصر به فرد، تراشه ی فلش با ظرفیت 
بالاست که بر مبنای پردازش تصویر اثر انگشت و تطبیق و جستجو در حافظه و 
انجام عملکرد های مورد نظر، کار می کند. این ماژول اثر انگشت می تواند از 
طریق رابط سریال UART ارتباط برقرار کند و امکان اتصال به میکروکنترلر طور 
مستقیم وجود دارد. این ماژول اثر انگشت دارای عملکرد پایدارو عالی است که 
فانکشن های مختلف اثر انگشت مانند جمع آوری اثر انگشت ، ثبت نام ، مقایسه و
 جستجو را انجام میدهد.
از ویژگی های های آن می توان به اندازه کوچک، 
مصرف کم انرژی، رابط کاربری ساده، قابلیت اطمینان بالا، تشخیص سریع، 
سازگاری با انگشت مرطوب و جستجوی اثر انگشت اشاره کرد.
کاربرد سنسور اثر انگشت AS608:
- قفل های هوشمند
 - جعبه های امنیتی
 - دستگاه های pos
 - سیستم های اکسس کنترل
 
مشخصات ماژول اثر انگشت AS608 :
- ولتاژ کاری: 3.3 ولت
 - جریان مصرفی: <60mA  میلی آمپر
 - مدت زمان اسکن اثر انگشت: <1.0 ثانیه
 - ابعاد صفحه اسکن: 15.3 در 18.2 میلیمتر
 - رزولوشن: 500 نقطه بر اینچ
 
Description:
The fingerprint sensor is 
one kind of sensor that is used in a fingerprint detection device. These
 devices are mainly inbuilt in the fingerprint detection module and it 
is used for computer safety.
AS608 fingerprint module is an 
integrated fingerprint processing module that integrates the optical 
path and the fingerprint processing part. It is small, low-powered 
consumption, simple interface, high reliability, fast recognition, wet 
finger adaptability, and fingerprint search. AS608 communicates with the
 UART communication interface.
All you need to do is send simple 
commands, and the fingerprint scanner can store different fingerprints. 
Via the serial interface, the fingerprint reader/sensor module can 
communicate with a microcontroller.
The fingerprint module has stable
 performance, perfect functions, and multiple fingerprint functions such
 as fingerprint collection, registration, comparison, and search.
This
 module is controlled by the serial port. As long as the serial port of 
the microcontroller embedded can operate this module, MSP430, 51, AVR, 
PIC, STM32, ARM, FPGA, Arduino controller can do as well.
Application:
gun boxes
door locks
POS machine
private clubs
access control system
Features:
Supply Voltage: DC 3.3V
Current: Operating Current: <60mA
Peak Current: <60mA
Fingerprint Image Input Time: <1.0 seconds
Window Area: 15.3 x 18.2 mm
Resolution: 500dpi
Principle of working:
1:
 The fingerprint algorithm extracted from the fingerprint image acquired
 characteristics, represents the fingerprint information. Fingerprint 
storage, comparison and search, and so on through the operations to 
complete minutiae.
2: fingerprint processing procedure comprising: a 
fingerprint and the fingerprint matching process login process [wherein 
the ratio of the fingerprint into the fingerprint matching (1: 1) and 
the search fingerprint (1: N) in two ways]. When the fingerprint logon, a
 fingerprint for each entry twice, and twice entered image processing, 
synthetic templates stored in the module. When fingerprint matching, 
fingerprint sensor, to verify fingerprint image input and processing, 
comparison and matching with the fingerprint template module (if matched
 with a template specified in the module, called the fingerprint 
matching method, i.e., 1: 1 mode; if matched with a plurality of 
templates, called fingerprint search methods, i.e., 1: N mode), the 
module gives the matching result (pass or fail).