Description:
The TFT Display interfaces and communicates with the microcontroller over SPI, so while using it, it must be connected to the SPI pins of the Arduino. TFT display can be supplied with logical level voltage (3.3V) and microcontroller level 5V, but it can't directly connect to 5V, before that, it must be applied a voltage regulator, otherwise, the display may be damaged. Some TFT display module has a built-in voltage regulator and can be connected directly to the 5V. If the display does not have a voltage regulator, it can be used any logic level converter between the display and the Arduino.
Application:
electronic projects
data monitoring
DIY
Features:
Display color : RGB 65K color
Model: MSP2402
size : 2.4 (inch)
Types of : TFT
Driver chip : ILI9341
Resolution : 320*240 (Pixel)
Module interface : 4-wire SPI interface
Effective display area (AA area) : 36.72x48.96 (mm)
Module PCB backplane size : 77.18x42.72 (mm)
Operating temperature : -20 ° C ~ 70 ° C
storage temperature : -30°C~80°C
VCC supply voltage : 3.3V~5V
Logic IO port voltage : 3.3V (TTL)
Power consumption : About 90mA