4 از 5.0 با 12 رای
شفت انکودر بمنظور تبدیل حرکت دورانی به پالسهای الکتریکی مورد استفاده قرار می گیرد.
پالسهای فرستاده شده از خروجی انکودر بوسیله مدارات مناسب الکترونیکی تجزیه و تحلیل می شوند. ماژول انکودر چرخشی با داشتن سویج دستی می تواند در پروژه های مختلف بکار آید. انکودر با پتانسیومتر متفاوت است، انکودر برخلاف پتانسیومتر فاقد محدودیت در چرخش کامل است و خروجی آن کد Gray می باشد. بنابراین از جهت و مقدار چرخش انکودر می تواند اطلاع حاصل نمود. این ماژول دارای دکمه Reset بر روی سنسور انکودر است که می تواند آن را به حالت اولیه برگرداند که از 0 شروع به شمارش کند. خروجی این ماژول دیجیتال است و با ولتاژ 5V تغذیه می شود. این ماژول به راحتی به همراه آردوینو قابل راه اندازی است.
مشخصات:
ولتاژ کاری: 5 ولت
چرخه شمارش پالس: 20
تعداد پین: 5 عدد
سایز: 42mm x 24mm
Description:
A rotary encoder is an electro-mechanical device that converts the angular position or motion of a shaft or axle to an analog or digital output signals. This module includes a rotational displacement encoder which outputs a series of pulses whenever the switch is rotated. The encoder module has a manual switch that is useful in different usages and projects.
The encoder is not the same as a potentiometer and has no limitation in rotation. Module's output is a digital Gray code.
The encoder module is easy to install with Ardunio. In order to make a low-level signal to rise to a higher level and produces no square pulse interference, it must use an electronic circuit to deal with.
Features:
Working Voltage: 5V
Circle of Pulse Count: 20
Pin Number: 5 Pins
Size: 42mm x 24mm