4 از 5.0 با 1 رای
Specifications
Incoming motor and servo motor drivers that support all pulse /direction control signal inputs
4-axis 9-axis output, up to 100K frequency output per axis, servo
Support 7-channel control signal output, spindle control, cooling, spray, and tool change control
Support 5 channels of control signal input - open, pause, stop, emergency stop, tool setting signal interface;
Support hardware 4 axis 8 direction limit input
Support soft limit
Support for backlash
Support 4-axis linkage, true four-axis linkage;
Support SD card, run offline, the tool path file can be greater than 100M;
Support straight line, circular interpolation
Support manual control panel to control 4-axis motion, support jog stepping mode
Support 3-axis electronic handwheel (customized)
Supports Windows XP , Vista , Windows 7 , 8 or 8.1 ( 32 -bit or 64- bit) desktop / laptop USB (V2.x)
Standard RS274/NGC G code (compatible with EMC2 and Linuxcnc )
Support advanced G code - G40 , G41 , G42 (tool radius compensation)
Support for advanced G code - G43 , G49 (tool length offset)
Support for advanced G code - G54 , g59.3 (origin of coordinate system)
Compatible with G- code generated by software such as SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM
G code supporting Profili4 axis and 3 axes
Support DXF file to directly generate tool path
Support PLT/HPGL file import to directly generate tool path
Support NC-Drill ( Excellon ) file import to directly generate tool tracks
Support Gerber ( RS-274x ) file import to directly generate tool path
Tool path simulation
Automatic coordinate zero return procedure
Supported tool change program
Automatic measurement of tool length
Export tool path to G code