آی سی سنسور خازنی تاچ TTP223-BA6 بسته 10 عددی

TTP223-BA6

4307-347-6798

27,120 تومان
کالا موجود است
موجودی انبار : 262 عدد


خرید کالا


علاقه مندان : 9 نفر
وضعیت : فعال

تعداد مرجوعی : 0
دنبال کنندگان : 10 نفر

قدمت : 5 سال و 8 ماه و 22 روز
وزن : 2 گرم

کل فروش : 3633 عدد
تعداد سفارش ها : 262 سفارش

هنوز هیچ رایی ثبت نشده است
سنسور خازنی لمسی TTP223-BA6 SMD

آی سی TTP223-BA6 ، یک آی سی تشخیص دهنده تاچ پد است که قادر به ایجاد یک کلید تاچ می‌باشد. این آی سی با هدف جایگزینی با کلیدهای قدیمی در ابعاد پد مختلف طراحی شده است. از جمله ویژگی های این آی سی می‌توان به توان مصرفی کم و دامنه ولتاژ کاری وسیع آن اشاره نمود.

آی سی سنسور خازنی تاچ TTP223-BA6 پکیج SOT23-6 دارد و به کمک آن می توان از اصطکاک کلیدهای فشاری جلوگیری کرد. مهم ترین مزیت این کلید، توان مصرفی پایین و امکان کار با سطح ولتاژ  2.5 تا 5.5 ولت دارد.


کاربرد سنسور تاچ TTP223-BA6:

  1. محصولات مصرفی
  2. جایگزین کلیدهای دکمه ای

مشخصات سنسور تاچ TTP223-BA6:

  1.  مدل: TTP223
  2. مد کاري : toggle يا سوئيچ
  3. تغذيه : 2.5V-5.5V
  4. مد تريگر : 1:Short – 0:Long
  5. جريان کاري : 13uA Max
  6. حساسيت قابل تنظيم پدها ، بطور ديفالت بدون هيچ خازني است که بتوان از بيشترين حساسيت آن استفاده کرد.
  7. زمان دسترسي : 60ms در حالت مد سريع و 220ms در حالت مد کم صرف

مستندات:
دیتاشیت TTP223-BA6


Description:
The TTP223-BA6/TTP223N-BA6 TonTouchTM is a touch pad detector IC which offers 1 touch key. The touching detection IC is designed for replacing traditional direct button key with diverse pad size. Low power consumption and wide operating voltage are the contact key features for DC or AC application.


Application:
Wide consumer products
Button key replacement 

Features:
Operating voltage 2.0V~5.5V
Operating current @VDD=3V, no load
At low power mode typical 1.5uA, maximum 3.0uA
The response time max 220mS at low power mode @VDD=3V
Sensitivity can adjust by the capacitance(0~50pF) outside
Stable touching detection of human body for replacing traditional direct switch key
Provides Low Power mode
Provides direct mode、toggle mode by pad option(TOG pin), Q pin is CMOS output
All output modes can be selected active high or active low by pad option(AHLB pin)
After power-on have about 0.5sec stable-time, during the time do not touch the key pad, And the function is disabled
Auto calibration for life
At low power mode the re-calibration period is about 4.0sec normally, When key detected touch and released touch, the auto re-calibration will be redoing after about 16sec from releasing key
The sensitivity of TTP223N-BA6 is better than TTP223-BA6’s. But the stability of TTP223N-BA6 is worse than TTP223-BA6’s.