هنوز هیچ رایی ثبت نشده است
برد چهار هسته ای 64 بیتی NanoPi K1 Plus دارای 2GB RAM و وایفای داخلی
Introduction
The NanoPi K1 Plus uses the Allwinner 64-bit quad-core Cortex™-A53 H5 SoC. It can run either a 64-bit OS or a 32-bit OS. It has NEON multi-media engine and a hex-core Mali450 GPU. It supports various video formats and has strong HD encoding/decoding capabilities.
The NanoPi K1 Plus has 2GB DDR3 RAM, onboard WiFi, DVP camera interface, Gbps Ethernet, USB, HDMI, infrared remote control, 3.5mm audio jack, I2S and etc. It can boot from a TF card and supports an external eMMC module.
The NanoPi K1 Plus has the same dimension as RPi 3. Its 40-Pin GPIO pin-header is compatible with RPi 3's GPIO pin-header. It works with any RPi housing.
A Ubuntu Core image and an Armbian image are ready for the NanoPi K1 Plus.
Hardware Spec
CPU: Allwinner H5, Quad-core 64-bit high-performance Cortex™-A53
GPU: Hexa-core Mali450
DDR3 RAM: 2GB
Ethernet: 10/100/1000M Ethernet using RTL8211E IC
Wireless: 802.11 b/g/n and onboard PCB antenna
Infrared: Onboard infrared receiver
Audio: 3.5mm audio jack/Via HDMI
Mic: onboard microphone
eMMC: onboard eMMC interface
I2S: onboard I2S interface(7Pin, 2.54mm pin-header)
MicroSD Slot: MicroSD card slot
USB Host: 3 x USB 2.0 Host, type A port
DVP Camera interface: 24-Pin, 0.5mm pitch FPC seat
MicroUSB: 1 x USB 2.0, OTG, for power input and data transmission
HDMI: HDMI Type-A port. It supports 4K@30fps dsplay
Video Output: HDMI 1.4. It supports 4K@30fps display, CVBS
GPIO Pin-header: 40 Pin,2.54mm pitch pin-header containing I2C, GPIO, UART, PWM, SPDIF, SPI and etc
Serial Debug Port: 4Pin, 2.5mm pitch pin-header
Button: 1 x GPIO button(user configurable)
LED: 1 x power LED and 1 x status LED
Power Interface: MicroUSB
PCB Size:56 x 85mm, 6-layer, ENIG
Power: DC 5V/2A