میکروکنترلر GD32F130C8T6 دارای پکیج LQFP48

GD32F130C8T6

4633-329-7313

58,470 تومان
کالا موجود است
موجودی انبار : 3 عدد


خرید کالا


علاقه مندان : -
وضعیت : فعال

تعداد مرجوعی : 0
دنبال کنندگان : -

قدمت : 5 سال و 6 ماه و 2 روز
وزن : 1 گرم

کل فروش : 41 عدد
تعداد سفارش ها : 15 سفارش

هنوز هیچ رایی ثبت نشده است
میکروکنترلر GD32F130C8T6 دارای پکیج LQFP48

آی سی GD32F130C8T6 یک چیپ پردازنده 32 بیتی با هسته آرم کورتکس M0 است و فرکانس کاری آن 72 مگاهرتز می باشد.
حافظه فلش روی برد میکروکنترلر 32 بیتی GD32F130C8T6 ظرفیت 64 کیلوبایتی دارد و حافظه SRAM آن 8 کیلوبایت است و مبدل آنالوگ به دیجیتال آن 12 بیتی است و 5 تایمر 16 بیتی دارد.
این آی سی از طریق اینترفیس های متفاوت RTC، I2C، USARTs، SPI، SWJ-DP با سایر دستگاه ها و ماژول ها ارتباط برقرار می کند.


کاربرد آی سی میکروکنترلر GD32F130C8T6:

  1. کنترل صنعتی
  2. درایو موتور
  3. سیستم های هشدار دهنده
  4. تجهیزات قابل حمل و مصرفی
  5. گیمینگ و GPS
  6. دوچرخه های برقی

مشخصات آی سی میکروکنترلر GD32F130C8T6: 

  1. هسته پردازنده 32 بیتی آرم کورتکس M3
  2. فرکانس عملیاتی 72 مگاهرتزی
  3. محدوده ولتاژ تغذیه: 2.6 ~ 3.6 V
  4. حافظه فلش: 64KB
  5. پکیج: LQFP48
  6. محدوده دمای کاری:  -40 ~ +85 C
  7. دارای چند مد کاری: 
    اسلیپ
    دیپ اسلیپ
    استندبای
  8. سازگار با اینترفیس های RTC، I2C USARTs SPI SWJ-DP

مستندات:
دیتاشیت GD32F130C8T6


Description:
The GD32F130xx device belongs to the value line of GD32 MCU family. It is a 32-bit general-purpose microcontroller based on the high performance ARM® Cortex ® -M3 RISC core with best ratio in terms of processing power, reduced power consumption and peripheral set. The Cortex ® -M3 is a next generation processor core which is tightly coupled with a Nested Vectored Interrupt Controller (NVIC), SysTick timer and advanced debug support.
The GD32F130xx device incorporates the ARM® Cortex ® -M3 32-bit processor core operating at 72 MHz frequency with Flash accesses zero wait states to obtain maximum efficiency. It provides up to 64 KB on-chip Flash memory and up to 8 KB SRAM memory. An extensive range of enhanced I/Os and peripherals connected to two APB buses. The devices offer one 12-bit ADC, up to five general 16-bit timers, a general 32-bit timer, a PWM advanced timer,
as well as standard and advanced communication interfaces: up to two SPIs, two I2Cs and two USARTs.

Application:
industrial control
motor drives
user interface
power monitor
alarm systems
consumer and handheld equipment
gaming and GPS, E-bike

Features:
32-bit ARM® Cortex®-M3 processor core
Up to 72 MHz operation frequency
Single-cycle multiplication and hardware divider
Integrated Nested Vectored Interrupt Controller (NVIC)
VDD range: 2.6 ~ 3.6 V
12-bit SAR ADC engine
7 channel DMA controller
Flash: 64KB
Package: LQFP48
Industrial temperature: -40 ~ +85 C
Sleep mode
Deep-sleep mode
Standby mode
7 channel DMA control
Real time clock (RTC)
Inter-integrated circuit (I2C)
Serial peripheral interface (SPI)
Universal synchronous asynchronous receiver transmitter (USART)
Serial wire JTAG debug port (SWJ-DP)
24-bit SysTick time