میکروکنترلر STM32F030K6T6 محصول کمپانی STmicroelectronics از نوع 32 بیتی با ساختار RISC و معماری ARM Cortex®-M0 می باشد، توانایی پردازش تا 48 مگاهرتز در کنار حافظه فلش 256 کیلوبایتی دارد و با ولتاژ کاری 3.3 ولت با پکیج LQFP32 ارائه شده است. کریستال داخلی 8 مگاهرتز و 40 کیلوهرتز به همراه کریستال ساعت 32 کیلوهرتزی با قابلیت اتصال کریستال خارجی 4 تا 32 مگاهرتز از دیگر ویژگی بخش اسیلاتور این میکروکنترلر می باشد. دارای بخش تغذیه آنالوگ جداگانه 3.3 ولتی می باشد. دارای 5 کانال DMA بوده. در قسمت مبدل آنالوگ به دیجیتال دارای 16 کانال 12 بیتی می باشد. در بخش تایمر از 11 کانال و یک کنترلر پیشرفته 16 بیتی برای 6 کانال PWM دارا می باشد. در نهایت یک بخش ورودی SWD جهت پروگرام کردن میکروکنترلر نیز تعبیه شده است.
Description:
The STM32F030x4/x6/x8/xC microcontrollers incorporate the high-performance Arm® Cortex®-M0 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (up to 256 Kbytes of Flash memory and up to 32 Kbytes of SRAM), and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (up to two I2Cs, up to two SPIs and up to six USARTs), one 12-bit ADC, seven general-purpose 16-bit timers and an advanced-control PWM timer. The STM32F030x4/x6/x8/xC microcontrollers operate in the -40 to +85 °C temperature range from a 2.4 to 3.6V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.
The STM32F030x4/x6/x8/xC microcontrollers include devices in four different packages ranging from 20 pins to 64 pins. Depending on the device chosen, different sets of peripherals are included. The description below provides an overview of the complete range of STM32F030x4/x6/x8/xC peripherals proposed.
Application:
application control
user interfaces
handheld equipment
A/V receivers and digital TV
PC peripherals
gaming and GPS platforms
industrial applications
PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs
Features:
Core: Arm® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz
Memories:
16 to 256 Kbytes of Flash memory
4 to 32 Kbytes of SRAM with HW parity
CRC calculation unit
Reset and power management
Digital & I/Os supply: VDD = 2.4 V to 3.6 V
Analog supply: VDDA = VDD to 3.6 V
Power-on/Power down reset (POR/PDR)
Low power modes: Sleep, Stop, Standby
Clock management
4 to 32 MHz crystal oscillator
32 kHz oscillator for RTC with calibration
Internal 8 MHz RC with x6 PLL option
Internal 40 kHz RC oscillator
Up to 55 fast I/Os
All mappable on external interrupt vectors
Up to 55 I/Os with 5V tolerant capability
5-channel DMA controller
One 12-bit, 1.0 µs ADC (up to 16 channels)
Conversion range: 0 to 3.6 V
Separate analog supply: 2.4 V to 3.6 V
Calendar RTC with alarm and periodic wakeup from Stop/Standby
11 timers
One 16-bit advanced-control timer for six-channel PWM output
Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding
Independent and system watchdog timers
SysTick timer
Communication interfaces
Up to two I2C interfaces
Up to six USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection
Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames
Serial wire debug (SWD)
