ماژول نمایشگر LCD کاراکتر 20x4

green 2004 LCD

4877-248-7732

143,200 تومان
کالا موجود است
موجودی انبار : 3 عدد


خرید کالا


علاقه مندان : 2 نفر
وضعیت : فعال

تعداد مرجوعی : 0
دنبال کنندگان : 3 نفر

قدمت : 5 سال و 3 ماه و 5 روز
وزن : 73 گرم

کل فروش : 126 عدد
تعداد سفارش ها : 46 سفارش

هنوز هیچ رایی ثبت نشده است
ماژول نمایشگر LCD کاراکتر 20x4 دارای رنگ زمینه سبز و ولتاژ کاری 5 ولت
نمایشگر کاراکتری 20x04 با نور پس زمینه سبز داراي 4 سطر 20 كاراكتري است و توسط پتانسيومتر متصل شده به پايه 3 ميتوان کنتراست را تنظيم كرد. پايه هاي 15 و 16 lcd مربوط به نور پس زمينه (backlight) ميباشد.
برقراري ارتباط lcd با arduino از طريق 6 پايه E,RS,DB4,DB5,DB6,DB7 صورت ميگيرد. در اين نوع از lcd علاوه بر نمايش حروف و اعداد ، امكان نمايش 8 كاراكتر ساخته شده توسط كاربر نيز وجود دارد.

کاربرد ماژول نمایشگر LCD کاراکتری سبز 20x4:

  1. پروژه های آردوینو
  2. پرینتر های سه بعدی
  3. پروژه های HMI

مشخصات ماژول نمایشگر LCD کاراکتری سبز 20x4:

  1. نوع کالا : ماژول نمایشگر کاراکتری
  2. نوع چیپست : HD44780
  3. نوع نمایشگر : LCD
  4. تعداد سطر و ستون : 4 سطر و 20 ستون
  5. رنگ بک لایت : سبز
  6. شدت جریان بک لایت : 40 میلی آمپر
  7. رابط ارتباطی : 4/8 بیتی Parallel 6800
  8. ولتاژ منبع تغذیه : 3.3 تا 5 ولت
  9. ابعاد داخلی : 60.60*22.60 میلیمتر
  10. ابعاد نمایشگر : 55.12*17.56 میلیمتر
  11. ابعاد برد : 77*47*13 میلیمتر

Description:
2004A LCD Display Board is a 20x04 character in 4 rows, high quality, blue/green backlight, and white character display, which is controlled by SPLC780 display driver chip. It is a serial LCD display without a pin header. The model name of 2004 means 20 columns (characters) multiply 04 rows, so this display can show 20 characters in each of the 4 rows of the 2004 LCD, therefore a total of 80 characters can be displayed simultaneously. It needs 6 digital pins and 2 power pins for an LCD.
The module can easily be interfaced and communicated to an Arduino board and microcontroller through an I2C communication interface (IIC/I2C Serial Interface Adapter Module). Because of not having a pin header, the I2C (IIC) adapter is needed to solder on the display module, then through I2C interface communication is established. Just 2 lines are required to display the information on any Arduino based projects. It will save at least 4 digital/analog pins on the Arduino. All connectors are based on the XH2.54 standard (Breadboard type).
Its backlight can conveniently be changed by a jumper wire or through the program, Also, for adjusting the contrast of the screen display, a blue part screw is provided. It can be supplied with 5V DC.

Application:
Arduino projects
3D printers
HMI projects

Features:
Backlight type: LED
Controller:SPLC780
Display content:20 characters × 4 lines
Working voltage +5V
Display screen: green screen
Working temperature:-10~+60°C
Storage temperature:-20~+70°C