ماژول LED دایره ای COB مهتابی 10 وات 220 ولت

COB LED-10W-220V

4914-185-7806

37,700 تومان
در حال حاضر موجود نمی باشد

موجودی در حال ارسال به انبار


خرید کالا


علاقه مندان : 2 نفر
وضعیت : فعال

تعداد مرجوعی : 0
دنبال کنندگان : 1 نفر

قدمت : 5 سال و 4 ماه و 2 روز
وزن : 3 گرم

کل فروش : 371 عدد
تعداد سفارش ها : 111 سفارش

4 از 5.0 با 2 رای
ماژول LED دایره ای COB مهتابی 10 وات 220 ولت

ماژول LED دایره ای COB  با توان 10 وات و شدت نور مناسب نور LED SMD با رنگ مهتابی (3000 تا 6000k) است. این LED COB با کیفیت و مخصوص نورپردازی با ولتاژ 220 ولت AC کار می کند. بنابراین برای استفاده می توان ماژول را مستقیم به برق شهری متصل کرد و نیازی به استفاده از تنظیم کننده ولتاژ و مبدل نیست. وایرینگ و ساختار این LED با فریم آلومینیومی، نور درخشان ( 10W LED)، طول عمر طولانی ، مصرف برق کمتر برخوردار است. قطر این ماژول 27 میلی متر است.
این ای ای دی دارای زاویه دید گسترده ای 140 درجه است ، بدین معنی که نور را در زاویه دید گسترده ای توزیع می کند و می تواند یک منطقه گسترده را پوشش دهد. 

توجه: قبل از روشن کردن LED حتما از هیت سینک مناسب به همراه سیلیکون استفاده شود. در غیر اینصورت LED می سوزد.


کاربرد ال ای دی COB:

  1. روشنایی خیابان
  2. روشنایی ترافیکی
  3. نورپردازی 
  4. ویترین فروشگاه
  5. دکوراسیون
  6. اتاق نمایشگاه
  7. روشنایی داخلی و خارجی

مشخصات COB LED:

  1. ولتاژ: 220 ولت AC
  2. چیپ: Dachau
  3. توان خروجی: 10 وات
  4. جریان: 1000 میلی آمپر
  5. رنگ LED: مهتابی 3000k-6000k
  6. جنس بدنه فلزی: آلومینیوم
  7. مجهز به Surge protection
  8. اثر نوری: ≥100LM/W

Description:
A COB LED (or chip-on-board LED) is a single device with many LED chips mounted on a thermally efficient substrate placed below a uniform phosphor coating. COB LEDs have a number of advantages over older LED technologies, such as Surface Mounted Device ("SMD") LEDs or Dual In-line Package ("DIP") LEDs. Each chip is a bare die – that is, the chip does not have its own lead frame, phosphor coating or lens. This means that the chips can be mounted extremely closely together on the substrate.  With a transparent substrate the LED chips may be installed "upside down" shining through for higher outcoupling. Typically they are glued to the substrate with UV setting glue, interconnects attached, and the encapsulant and phosphor applied in a single step with a back reflective coating applied to channel light out of the device.

Features:

Chip brand: Dachau

Thermal resistance: ≤5(°/W)

Rated current: 1(A)

Luminous surface size: 11(mm)

Light effect: ≥100LM/W

lamp beads: 24(imported flip chip)

Beam angle:140°

LM-80 test: No

Operating temperature: -30~+90C

life: ≥50000 hours

Anti-leakage level: ≥AC1750V

Surge protection level: (Differential mode ≥400V),(common mode: ≥2KV)

Color temperature range: 3000K-6000K(K)

Application:

Lighting street

Traffic lighting

Landscape lighting

shop vitrine

Store

Exhibition room

Indoor and outdoor lighting