موجودی انبار : 9 عدد
هنوز هیچ رایی ثبت نشده است
ماژول گیرنده لرنینگ رادیویی 433Mhz
Features:
Working voltage: 4.5-5.5V (input end)
VCC: connect to the positive pole of the power supply
GND: connect to the negative pole of the power supply
Output mode: The default output level is low when the power is on. Press the remote control button to output high level, OUT1-OUT4, which are 4 output ports
Maximum output current: within 10MA of each maximum output current
Static working current: about 3mA
Receiver size: 20 * 30 * 6
Module type: 433M learning wireless receiving module (4 channels can learn independently)
Receiving distance: between 15-100 meters (can pass through the wall)
Work instructions: D1 (learning indicator and receiving signal indicator)
Output level: The output high level is equal to or slightly less than the VCC voltage
1. Learning methods:
A. After power on, press the learning button, the learning indicator light will flash once, indicating that the first channel of learning is triggered successfully. Then press the button of the remote control to be learned, and the learning indicator light will flash twice, indicating that the first channel of learning is successful.
B. After power on, press the learning button, the learning indicator light will flash twice, indicating that the learning of the second channel is triggered successfully, then press the remote control button that needs to be learned, the learning indicator light will flash twice, indicating that the second channel is successfully learned
C. After power on, press the learning button, the learning indicator will flash 3 times, indicating that the learning of the third channel is triggered successfully, then press the remote control button that needs to be learned, the learning indicator will flash 2 times, indicating that the third channel is successfully learned.
D. After power on, press the learning button, the learning indicator will flash 4 times, indicating that the learning of the 4th channel is triggered successfully, then press the remote control button that needs to be learned, the learning indicator will flash 2 times, indicating that the fourth channel is successfully learned.
E. Clearing method: In the power-off state, press and hold the learning button, then power on, the learning indicator flashes 4 times, indicating that the module has been cleared successfully
2. Self-locking inching interlocking function conversion operation
Interlock: In the power-off state, press and hold the learning button and then power on. The learning indicator flashes once, and then release the button. At this time, it is set to interlock output. (Press the remote control button, the corresponding channel of the module has output, and all other channels are closed and have no output)
Self-locking: In the power-off state, press and hold the learning button and then power on. The learning indicator flashes twice, and then release the button. At this time, it is set to self-locking output. (Press the remote control button, the corresponding output channel of the module is reversed without affecting the status of other channels. Release the remote control to maintain the output status)
Jog: In the power-off state, press and hold the learning button to power on, the learning indicator flashes 3 times, release the button, and it is set to jog output. (Press the remote control button, the corresponding channel of the module has output, release the remote control to stop the output