کارت تبدیل PCIE3.0 به پورت SATA و M-key MVME

کارت تبدیل PCIE3.0 به پورت SATA و M-key MVME

تکنولوژیPCIe یا peripheral component interconnect express یک استاندارد رابط برای اتصال اجزای پر سرعت است. هر مادربرد رایانه رومیزی دارای تعدادی اسلات PCIe است که می توانید برای اضافه کردن GPU (کارت های گرافیکی کارت های ویدیویی با نام مستعار) ، کارت های RAID ، کارت های Wi-Fi یا SSD (درایو حالت جامد) استفاده کنید. انواع شکافهای PCIe موجود در رایانه شخصی شما به مادربردی که خریداری می کنید بستگی دارد.
نسل سوم کارت، PCEI 3.0 می باشد که دارای قدرت ارسال و پهنای باند بیشتر نسبت به نسل قبل است.
این نوع از کارت تبدیل از هاردهای SSD 67PIN و هاردهای SSD از نوع M2 Gen2 و Gen3 با اندازه 42، 60 و 80 میلی متر پشتیبانی می کند. سرعت انتقال داده بسته به اسلات PCI کامپیوتر و درایو هارد SSD می تواند تغییر کند.
تکنولوژی NVMe (Non-Volatile Memory Express) در واقع یک رابط کاربری برای مدیریت دستگاه‌های ذخیره سازی است که برای اتصال دستگاه‌های SSD از آن در اینترپرایز و کامپیوترهای خانگی استفاده می‌شود. این رابط از باس PCIe برای اتصال بهره می‌برد. اتصال NVMe در واقع راه حل جایگزین برای SCSI و SATA به شمار می‌رود که در حال حاضر به صورت گسترده مورد استفاده قرار می‌گیرد. استفاده از پروتکل NVMe باعث بهبود سرعت I/O‌های خواندن و نوشتن می‌شود؛ همچنین در این حافظه‌ها زمان تأخیر به‌شدت کاهش پیدا می‌کند.

Description:
PCIe (peripheral component interconnect express.) is an interface standard for connecting high-speed components. Every desktop PC motherboard has a number of PCIe slots you can use to add GPUs (aka video cards aka graphics cards), RAID cards, Wi-Fi cards, or SSD (solid-state drive) add-on cards. The types of PCIe slots available in your PC will depend on the motherboard you buy. PCIe has three important factors, Bandwidth, Gigatransfer, and Frequency. PCIe 3.0 has 32 GB/s bandwidth and its Giga transfer is 8 GT/s with a frequency of 8 GHz.
PCIe standards currently come in three different generations: PCIe 1.0, PCIe 2.0, PCIe 3.0 and PCIe 4.0. Bandwidth doubles with each generation. Your PCIe card will run at the lowest generation present. So if you put a PCIe 2.0 card in a PCIe 3.0 slot, you’ll get PCIe 2.0 performances. An M. 2 card plugged into a PCIe adapter, is still PCIe connected, so virtually no difference. The advantage here is that you could potentially get a card that accepts multiple drives and plug it into an x16 slot. A direct PCIe SSD can go directly to the CPU or through the PCH depending on which PCIe slot you use. Many of these existed before NVMe was a standard, so they typically weren't capable as boot drives, but offered professionals extreme performance (at the time) compared to SATA SSDs and hard drives. 2 based SSDs are the NVMe (non-volatile memory express) based models that connect via PCI-express. SSDs are essentially high-speed memory similar to RAM, but because SATA 3.0 was only capable of 6GB/s, SSD speeds eventually plateaued. NVMe is an open standard developed to allow modern SSDs to operate at the read/write speeds their flash memory is capable of. Essentially, it allows flash memory to operate as an SSD directly through the PCIe interface rather than going through SATA and being limited by the slower SATA speeds. NVMe will be the protocol of choice for the next generation of storage technologies such as 3D XPoint. PCIe 4.0 refers to the fourth generation of PCIe interface which has double the bandwidth (64GB/s for an x16 slot) compared to PCIe 3.0 (32GB/s for an x16 slot), which is the usual improvement between PCIe generations.

Features:
One M2 PCIe (67pin M key) SSD solid-state drive can be installed in PCIe 3.0 × 4 slots.
It supports M2 PCIe Gen3 and PCIe Gen2 SSD solid-state drives with lengths of 42, 60, and 80 mm, and supports Samsung 950PRO, SM951, XP941, Plextor M6E, and other models.
Support PCIe 1.0, 2.0 and 3.0 slots.
The transmission speed depends on the specifications of the M2 PCIe SSD solid-state drive and the PCI-E slot of your computer motherboard. In order to obtain transmission performance, it is recommended to select a PCI-E 3.0 slot for this card.
It can be installed in a standard height slot or a low baffle slot, the standard configuration includes high and low baffles.
In desktop computers, workstations, and servers, replace traditional mechanical hard drives with M2 PCIe SSD solid-state drives with faster speeds, lower power consumption, and better shock resistance.
M2 PCIe SSD solid-state drive can be used to install the operating systems and application software (requires motherboard chipset and BIOS support).
Supports various operating systems without driver installation.