Description:
The UART adapter is based on the CH340 chip, equipped with a Type-C port and pads for testing the GY-25T six-axis tilt sensor. Also on the adapter board there are contacts for connecting to an external UART interface.
USB-C interface USB to TTL module, no usb cable is provided by default, you can use the mobile phone data cable to connect to the computer (not a cable that can only be charged)
After connecting to the computer USB, you will be prompted to install the driver. After downloading the driver from the following link, the installation is successful. Check the computer device management and there will be one more COM port.
The USB to TTL module is connected to the sensor module, and the wiring method is usually cross-connection, that is, RX---TX, TX---RX.
The VCC output voltage is 5v of the USB power supply. When sending and receiving data, the corresponding RX and TX LEDs will flash
Features:
model: GY-USB-TTL-01
Brand: GY
Dimensions: 33x19x3mm