Description:
Orange Pi 5 is from Rockchip RK3588S 8-core 64-bit new generation processor, quad-core A76 + quad-core A55, with 8nm process design, core frequency up to 2.4GHz, integrated ARM Mali-G610 GPU, 3D performance Uses embedded above. 2D image acceleration module, built-in NPU with 6Tops computing power, with 4GB (LPDDR4/4X) and 32GB eMMC, with dual-band Wi-Fi6, BT5.3 and display processing capability up to 8K.
Orange Pi 5 supports Orangepi OS, the official operating system developed by Orange Pi, as well as Android12 and Debian11, Ubuntu22.04, Ubuntu20.04.
Application:
Tablets
Smart security
smart House
Various AIoT industries
Music
TV box
Smart projector equipment
mini computer
Smart robot
Game console
Specifications:
Main control chip: Rockchip RK3588S (8nm LP)
CPU: 8-core 64-bit processor
4 Cortex-A7604 Cortex-A55,
The main frequency of the large core is 2.4GHz, and the main frequency of the small core is 1.8GHz
GPU: ARM Mali-G610
Built-in 3D GPU
OpenGL ES1.1/2.0/3.2. OpenCcL 2.2 Vulkan 1.2
NPU: Built-in AI accelerator NPU with up to 6 Tops computing power, supports INT4/INT8/INT16 mixed computing
PMU: RK806-1
RAM: 4GB (LPDDR4/4x)
Storage: QSPI Nor FLASH 8MB
MicroSD (TF) Card
PCle M.2 M-KEY NVMe SSD
USB: USB3.0*1; USB2.0*2; Type-C (USB3.0) * 1
Video output: HDMI2.1, maximum support 8K@60Hz
DP1.4 (DisplayPort), DP1.45USB3.0, shared port with Type-C
2* MIPI D-PHY TX 4Lane, the maximum configuration can be 4K@60Hz
Camera: MIPI CSI 4Lane
2* MIPI D-PHY RX 4Lane
Audio: CODEC:ES8388
3.5mm headphone jack audio input/output
Input: Onboard MIC
HDMI 2.1 eARC
PCle M.2 M-KEY Socket: SSD solid state drive module supporting PCIe M.2 M-KEY NVMe
WI-FI6+BT5.0 custom module supporting PCIe M.2 M-KEY
Ethernet: 10/100/1000Mbps Ethernet (YT8531B)
Expansion port: 26Pin double-row pin, supports the following functions:
3*UART;6*PWM;2*I2C;1*SPI;2*CAN;17*GPIO;
These functions are multiplexed and cannot be supported at the same time
Keys: 1* MaskROM key, 1* switch key, 1* RECOVERY key
Power supply: Support Type-C power supply (5V4A)
LED: Power Indicator: Red; Status Indicator: Green
Debug: 3Pin debug serial port (UART)
Supported OS: Android12, Debian11